Polymetron 9582 Dissolved Oxygen System with 4-20 mA Output Communications, 100 - 240 V AC

Polymetron 9582 Dissolved Oxygen System with 4-20 mA Output Communications, 100 - 240 V AC
Produto n.º: 9582.99.09P4
Preço Unitário Contacte-nos
Enviado em 2 semanas

Save Time on Design

A single design source and one product platform means you spend less time searching for design files or configuring components. Create and reuse your optimal design templates.

Accelerate Your Installation

One source, interchangeable electronic components, a common user interface, and one support team make installation faster and less complicated. Quickly and easily transfer user settings between dissolved oxygen loops.

Reduce Training Complexity

A single platform minimises time required to teach and learn product operations, getting new systems in use faster.

Simplify Maintenance and Operation

Common menu guides reduce variability and provide step-by-step procedures for maintenance and calibration. Standard visual alerts across parameters notify operators when troubleshooting is required. Start-up and maintenance time are minimised with pre-mounted membrane cap and factory pre-conditioned sensors.

Conteúdos

Controller, mounting hardware, oxygen sensor, temperature sensor, cable, flow-chamber, basic user manual

Especificações

Aberturas de los conductos: 1/2" NPT Conduit
Capacidades de comunicação: 5x salidas 4-20mA
Caudal da amostra: 66 - 166
Certificaciones eléctricas: EMC
CE compliant for conducted and radiated emissions:
- CISPR 11 (Class A limits)
- EMC Immunity EN 61326-1 (Industrial limits)
Safety
CAN/CSA C22.2 No. 61010-1
Compensación de la temperatura: Automatic in the range of 0 - 45 °C (32 - 113 °F)
  Automático no intervalo de 0 – 45 °C (32 – 113 °F)
Comprimento do cabo: 10 m (33 ft)
Comunicación: digital: MODBUS RS232/RS485, PROFIBUS DPV1, HART optional
Condições de armazenamento: -20 °C - 70 °C
Conexión: 1/4" NPT thread (6mm or 1/4" tubing advised)
  8 mm tubing
Conteúdos: Controller, mounting hardware, oxygen sensor, temperature sensor, cable, flow-chamber, basic user manual
Funções de relé: Scheduler (Timer), Alarm, Feeder Control, Event Control, Pulse Width Modulation, Frequency Control, and Warning
Gama de medição: 0 - 2000 ppb
  0 - 2000 ppb (0-2 ppm)
Idiomas del manual: Bulgarian, Chinese (PRC), Croatian, Czech, Danish, Dutch, English, Estonian, Finnish, French, German, Greek, Hungarian, Italian, Japanese, Korean, Lithuanian, Polish, Portuguese (Brazil), Portuguese (Portugal), Romanian, Russian, Slovak, Slovenian, Spanish, Swedish, Thai, Turkish
Intervalo de manutenção: Membrane Lifetime: 6 months depending on sample
Limite inferior de detecçao : < 1 ppb
Material: Electrodes: Gold cathode, Silver anode; Flow-through cell: Stainless Steel 316L; Membrane: PFA, Sensor Body: Noryl
  Polycarbonate
Aluminium (powder coated)
Stainless Steel
Medições: 0 to 2000 ppb (0-2 ppm)
Método de Calibração: Zero: Electrically or with oxygen free water, Slope: in air or against a laboratory measurement
Pantalla: Graphic dot matrix LCD with LED backlighting, transreflective
Peso: 3.2 kg
Protecção da estrutura: IP66 / NEMA 4X
Relé: Modo operacional: Primary or secondary measurement, calculated value (dual channel only) or timer/scheduler
Relés: Four electromechanical SPDT (Form C) contacts, 1200 W, 5 A
Repetibilidad: ± 0,5 ppb o ±5%, o que seja maior
Reprodutibilidade: ± 0.5 ppb ou ± 2% o que for maior
Requisitos de alimentação (Hz): 50/60 Hz
Requisitos de alimentação (tensão): 100 - 240 V AC
Resolução do monitor : 240 x 160 pixels
Security levels: 2
Tamaño de pantalla: 48 x 68 mm
Temperatura de funcionamento: -20 - 60 °C at 0 - 95% RH (non-condensing)
Tiempo de respuesta: For step change 1-40 ppb: <30s
Unidades: mg/L, ppm, µg/L, ppb, mbar, hPa, inch Hg, mmHg