Imprimir

EZ7300 Microbial Activity ATP Analyser

Produto n.º: EZ7300.XXXXXXXX

Preço Unitário Contacte-nos

EZ7300 ATP Analyser, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets, 2 x empty 5L Reagent Container with Fittings (NaOH & HCl Solution) and 3 x Screwcap/Fittings/Reference1/Reference2

Alarmes: 1 x malfunctioning, 4 x user-configurable, max. 24 VDC/0.5 A, potential free contacts

Calibração: Automatic, 2-point; frequency freely programmable

Caudal da amostra: 100 - 300 mL/min

Certificações: CE compliant / UL certified

Ciclo de medição: 7 - 10 minutes incl. sample lysis

Classe de proteção: Analyser cabinet: IP44 / Panel PC: IP65

Conteúdos: EZ7300 ATP Analyser, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets, 2 x empty 5L Reagent Container with Fittings (NaOH & HCl Solution) and 3 x Screwcap/Fittings/Reference1/Reference2

Demineralised water: For rinsing

Dimensões (A x L x P): 690 mm x 465 mm x 330 mm

Dreno: Atmospheric pressure, vented, min. Ø 32 mm

Earth connection: Dry and clean earth pole with low impedance (< 1 Ohm) using an earth cable of > 2.5 mm²

Exactitud: Better than 4% full scale range for standard test solutions

Fonte de alimentação: 100 - 240 VAC, 50/60 Hz

Gama de medição: 0.5 - 200 pg/mL

0.5 - 200 pg/mL

Garantia: 24 meses

Instrument air: Dry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air

Interferencias: High concentrations of Hg²⁺, Cu²⁺, Zn²⁺, Cd²⁺, Fe²⁺. Total salt concentrations higher than 1 g/L. pH lower than 5.5 and higher than 8.

Limite de deteção: ≤ 0.05 pg/mL (0.1 pM) ATP

Material: Hinged part: Thermoform ABS, door: PMMA
Wall section: Galvanised steel, powder coated

Método de medição: Determination of adenosine triphosphate (ATP) by means of chemiluminescent reaction using luciferin and luciferase, conform with standard method ASTM D4012-81

Modelo: EZ7300

Número de Corrientes de muestra: 1, 2, 4, or 8

Parâmetro: ATP

Peso: 30 kg

Potência/Energia: 100 - 240 VAC, 50/60 Hz
Max. power consumption: 120 VA

Pressão da amostra: Maximum 3 bar for direct injection or by external overflow vessel via the grab sample pump

Reagent Requirements: Keep between 4 - 8 °C during operation, shielded from light. For prolonged storage, store at -20 °C in a dark environment.

Saídas analógicas: Active 4 - 20 mA max. 500 Ohm load, standard 1, max. 8 (option)

Saídas digitais: Optional: Modbus (TCP/IP, RS485)

Temperatura ambiente: 7 - 23 °C ±4 °C deviation at 5 - 95% relative humidity (non-condensing)

Temperatura da amostra: 5 - 30 °C

Validation: Automatic; frequency freely programmable