Imprimir

EZ3003 Chloride Analyser

Produto n.º: EZ3003.XXXXXXXX

Preço Unitário Contacte-nos

EZ3003 Chloride Analyser, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets, 1 x ISE Chloride Electrode and 1 x empty 2.5L Reagent Container with Fittings (for Buffer Solution)

Alarmes: 1x malfunctioning, 4x user-configurable, max. 24 VDC/0.5 A, potential free contacts

Calibração: Automatic, 2-point; frequency freely programmable

Caudal da amostra: 100 - 300 mL/min

Certificações: CE compliant / UL certified

Ciclo de medição: 5 minutes

Classe de proteção: Protection class: Analyser cabinet: IP44 / Panel PC: IP65

Conteúdos: EZ3003 Chloride Analyser, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets, 1 x ISE Chloride Electrode and 1 x empty 2.5L Reagent Container with Fittings (for Buffer Solution)

Demineralised water: For rinsing

Dimensões (A x L x P): 690 mm x 465 mm x 330 mm

Dreno: Atmospheric pressure, vented, min. Ø 32 mm

Earth connection: Dry and clean earth pole with low impedance (< 1 Ohm) using an earth cable of > 2.5 mm²

Exactitud: Better than 2% full scale range for standard test solutions

Fonte de alimentação: 100 - 240 VAC, 50/60 Hz

Gama de medição: 1 ‐ 10 mg/L

Garantia: 24 meses

Instrument air: Dry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air

Interferencias: Bromide, sulphide, iodide, cyanide ions may interfere. Mercury must be absent. Ammonia and thiosulphate may interfere. Fats, oil, proteins, surfactants and tar.

Limite de deteção: 1 mg/L

Limpeza automática: Sim

Material: Hinged part: Thermoform ABS, door: PMMA
Wall section: Galvanised steel, powder coated

Metodo: Ionselective

Método de medição: Discontinuous, direct measurement by combined ion-selective electrode, conform with standard methods EPA 9212 and ASTM D512-12

Modelo: EZ3003

Número de Corrientes de muestra: 1, 2, 4 or 8

Parâmetro: Chloride

Peso: 25 kg

Potência/Energia: 100 - 240 VAC, 50/60 Hz
Max. power consumption: 120 VA

Pressão da amostra: By external overflow vessel

Qualidade da amostra: Maximum particle size 100 µm, < 0.1 g/L; Turbidity < 50 NTU

Reagent Requirements: Keep between 10 - 30 °C

Saídas analógicas: Active 4 - 20 mA max. 500 Ohm load, standard 1, max. 8 (option)

Saídas digitais: Optional: Modbus (TCP/IP, RS485)

Temperatura ambiente: 10 - 30 °C ±4 °C deviation at 5 - 95% relative humidity (non-condensing)

Temperatura da amostra: 10 - 30 °C

Validation: Automatic; frequency freely programmable