EZ1025sc Manganese Colorimetric Analyser, 1 stream, 4x mA Output

EZ1025sc Manganese Colorimetric Analyser, 1 stream, 4x mA Output
Produto n.º: EZ1025.9800140T
Preço Unitário Contacte-nos

Trusted Equipment for Critical Operations

High-quality materials and robust engineering come together in the EZ sc Series to provide 24/7 reliability. Designed for long-term performance, it reduces breakdowns and ensures consistent operational success. Equipped with advanced Manganese monitoring, the EZ sc Series accurately analyzes Dissolved Manganese to 0.002 mg/L and Total Manganese to 0.004 mg/L. This helps maintain compliance with drinking water standards and prevents issues like staining and corrosion.

Real-Time Data for Faster Decisions

Advanced connectivity and real-time monitoring provide immediate access to actionable insights. Facilities equipped with EZ sc Series of online analysers, experience improvement in reaction times, enabling better decision-making and quicker response during critical conditions. Additionally, comprehensive manganese analysis, including Mn(II), total manganese helps facilities monitor water quality at intake points and maintain efficiency as water conditions change seasonally.

Simplified Troubleshooting with Expert Support

Built-in diagnostics and secure remote data access streamline and enhance issue resolution in the EZ sc Series. Backed by a highly responsive team of experts, it reduces operational downtime and ensures peak functionality. By identifying and resolving issues early, it helps maintain system efficiency and prevents costly downtime and repairs. It also proactively addresses industrial challenges such as corrosion and heat exchanger degradation caused by Manganese buildup.

Clear Workflows for Predictable Outcomes

The EZ sc Series simplifies implementation and operation by using standardised tools and guided workflows to ensure consistency throughout. By reducing miscommunication and establishing clear expectations, it helps eliminate process inconsistencies, promoting greater efficiency and reliability.

Conteúdos

EZ1025sc Manganese Analyser, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets, 3 x empty 2.5L Reagent Containers with Fittings (for Colour, Buffer & Reductor Solution) and 1 x empty 10L Reagent Container with Fittings (for EDTA Solution)

Especificações

Calibração: Automatic; 2-point; offset or slope; Frequency freely programmable: 6 hours, 12 hours, daily, weekly. Note: manufacturer recommends that a calibration is done when the reagents are replaced
Caudal da amostra: 100 - 300 mL/min
Certificações: CE, ETL certified to UL and CSA safety standards, UKCA
Ciclo de medição: No Dilution
Default: 10 min.
Continuous: 10 min.

Internal Dilution
Default: 15 min.
Continuous: 13 min.
Classe de proteção: IP44
Conteúdos: EZ1025sc Manganese Analyser, Instruction Manual, 1 x Double Bit Door Key, 1 x Mounting Brackets, 3 x empty 2.5L Reagent Containers with Fittings (for Colour, Buffer & Reductor Solution) and 1 x empty 10L Reagent Container with Fittings (for EDTA Solution)
Demineralised water: Internal dilution option: Rinse water & Dilution water
Dimensões (A x L x P): 688 mm x 460 mm x 340 mm
Dreno: Atmospheric pressure, vented, min. Ø 32 mm
Earth connection: Dry and clean earth pole with low impedance (< 1 Ohm) using an earth cable of > 2.5 mm²
Exactitud: Better than 2% full scale range for standard test solutions
Gama de medição: No Dilution
0.002 - 0.1 mg/L Mn
0.005 - 0.25 mg/L Mn
0.005 - 0.5 mg/L Mn
0.01 - 1 mg/L Mn

Internal Dilution
0.05 - 5 mg/L Mn
0.1 - 10 mg/L Mn
0.25 - 25 mg/L Mn
0.5 - 50 mg/L Mn
0.75 - 75 mg/L Mn
1 - 100 mg/L Mn
Garantia: 24 meses
Instrument air: Dry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air. Used to flush the instrument in corrosive environement. Min. 0.2 bar - Max. 0.5 bar
Interferencias: The ions commonly found in water and wastewater do not interfere. Large quantities of color and turbidity interfere. Fats, oil, proteins, surfactants and tar interfere.
Limite de deteção: No Dilution
0.002 - 0.1 mg/L Mn: 0.002 mg/L
0.005 - 0.25 mg/L Mn: 0.005 mg/L
0.005 - 0.5 mg/L Mn: 0.005 mg/L
0.01 - 1 mg/L Mn: 0.01 mg/L

Internal Dilution
0.05 - 5 mg/L Mn: 0.05 mg/L
0.1 - 10 mg/L Mn: 0.1 mg/L
0.25 - 25 mg/L Mn: 0.25 mg/L
0.5 - 50 mg/L Mn: 0.5 mg/L
0.75 - 75 mg/L Mn: 0.75 mg/L
1 - 100 mg/L Mn: 1 mg/L
Limpeza automática: Yes; Frequency freely programmable: 6 hours, 12 hours, daily, weekly
Material: Hinged part: Thermoform ABS, door: PMMA
Wall section: Galvanised steel, powder coated
Método de medição: Formaldoxime colorimetric method
Número de Corrientes de muestra: Standard: 1
Optional accessory for 2, 4, or 8 sample streams
Parâmetro: Manganese
Peso: Max. 35 kg
Potência/Energia: 100 - 240 VAC, 50/60 Hz
Max. power consumption: 120 VA
Pressão da amostra: By external overflow vessel (open to atmospheric pressure)
Qualidade da amostra: Maximum particle size 100 µm, < 0.1 g/L; Turbidity < 50 NTU
Reagent Requirements: Keep between 10 - 30 °C
Relés: 5 contacts, not user configurable: Malfuntion, maintenance, analysis ready, sample ready, sample ready (EZ9150)
Saída: Optional: Claros Ethernet connection and Modbus TCP/IP Ethernet connector; LAN version; 10/100 Mbps or Profinet or Ethernet IP
Saídas analógicas: Active 0 - 20 mA (or 4 - 20 mA) max. 500 Ohm load, standard: 4, optional: 8
Saídas digitais: Profibus DP or Modbus RTU
Temperatura ambiente: 10 - 30 °C ± 4 °C deviation at 5 - 95% relative humidity (non-condensing)
Temperatura da amostra: 5 - 30 °C
Validation: Automatic; Frequency freely programmable: 6 hours, 12 hours, daily, weekly