Imprimir

EZ1016sc Total Hardness Analyser

Produto n.º: EZ1016.XXXXXXXT

Preço Unitário Contacte-nos

Alarmes: Malfunction, maintenance, analyser busy

Calibração: Automatic, 2-point; frequency freely programmable

Caudal da amostra: 100 - 300 mL/min

Certificações: CE compliant / ETL certified

Ciclo de medição: 10 min (dilution + 5 min.)

Classe de proteção: IP44

Demineralised water: For rinsing / dilution

Dimensões (A x L x P): 690 mm x 465 mm x 330 mm

Dreno: Atmospheric pressure, vented, min. Ø 32 mm

Earth connection: Dry and clean earth pole with low impedance (< 1 Ohm) using an earth cable of > 2.5 mm²

Exactitud: Better than 2% full scale range for standard test solutions

Gama de medição: 0,05 - 1 mg/L CaCO3

Optional (with internal dilution):
0,025 - 0,25 mg/L
0,025 - 0,5 mg/L
0,5 - 10 mg/L
1,25 - 25 mg/L
2,5 - 50 mg/L
3,75 - 75 mg/L
5,0 - 100 mg/L

0.025 - 1 mg/L CaCO₃

Garantia: 24 meses

Instrument air: Dry and oil free according to ISA-S7.0.01-1996 quality standard for instrument air

Interferencias: Some metal ions interfere by causing fading or indistinct end points or by stoichiometric consumption of EDTA. Large amounts of colour and turbidity interfere. Fats, oil, proteins, surfactants and tar.

Limite de deteção: ≤ 2.5 µg/L CaCO₃

Limpeza automática: Sim

Material: Hinged part: Thermoform ABS, door: PMMA
Wall section: galvanised steel, powder coated

Metodo: Colorimetric

Método de medição: Colorimetric measurement at 610 nm using calmagite/EDTA

Modelo: EZ1016sc

Número de Corrientes de muestra: 1, 2, 4, or 8

Parâmetro: Total Hardness

Peso: 25 kg

Potência/Energia: 100 - 240 VAC, 50/60 Hz
Max. power consumption: 120 VA

Pressão da amostra: By external overflow vessel

Qualidade da amostra: Maximum particle size 100 µm, < 0.1 g/L; Turbidity < 50 NTU

Reagent Requirements: Keep between 10 - 30 °C

Saídas analógicas: Active 4 - 20 mA max. 500 Ohm load, standard 1, max. 8 (option)

Saídas digitais: Optional: Modbus (TCP/IP, RTU/RS485), Profinet, Profibus DP, Ethernet/IP

Temperatura ambiente: 10 - 30 °C ± 4 °C deviation at 5 - 95% relative humidity (non-condensing)

Temperatura da amostra: 10 - 30 °C

Validation: Automatic; frequency freely programmable